Just as the name suggests, interior painting is application of paints in the interior portion of a space.
With time this process has grown in versatility and has become one of the most important factor in the field of interior design.

Following are the jobs done

Surface Preparation

  • Cleaning – Clean the wall area. It should be free from dust.
  • Ensure to scrub off all the old paintings and loose plaster batches If you are painting an old wall surface.
  • Scrub with sand papers to give a dry finish.
  • Cover all the parts of the building that should be free from paint splatter such as doors, windows, switch boxes, furniture etc.


  • Caulking– Fill up the door and windows sidewall cracks by caulking process.
  • Primer – Apply one coat of Primer. We already discussed why primer is important?
  • Putty – Apply one coat of putty. The putty paint will give a smooth finish to the wall and rectify any undulations on the wall surface. Warning – Putty are very expensive. If the wall has more undulations you end up with a big hole in the wallet.
  • Paint – After finishing putty ask electrical people to fix switch box. Once switch boxes are fixed to ensure to cover them up to avoid paints splattered all over them. Apply 2 coats of paint.


Exterior Paints are designed to withstand extreme weather conditions. Formulation of exterior paints includes specific ingredients that can offer protection for fluctuating weather conditions

Following are the jobs done
  • Surface Preparation
    • Ensure the wall had sufficient curing time. 35 -50 days.
    • Ensure the wall is fully dried. Avoid painting on wet walls.
    • Ensure the openings of drainage pipes and scaffolding gaps are filled.
    • Make sure to cover the doors and windows to avoid paint splatter all over them.


    • Exterior Wall Primer – Apply one coat of recommended exterior wall primer.
    • Paint – Apply 2 coats of paint. Allow 4-6 hours of time between the coats.



Commercial painting is bigger version of residential painting. It involves all kind of painting like walls designing, home painting, banners, or your farm. This painting involves all kind painting jobs.

Following are the jobs done

    • check the building for leaks, cracks, damaged vents, broken dehumidifiers etc.
    • Preparation of  the building for painting which includes the removal of

                  Rust, Cracked Paint ,Grease, Mildew, Chemical Residue, Various Types of Pollution

    • Application of the primer.
    • Painting process




Industrial paint has two purposes Firstly, it provides a protective coating for the substrate against chemical and physical attacks. Secondly, it gives the product a pleasing appearance and this increases its value.

Following are the jobs done

    • Surface Cleaning
    • Priming Surface
    • High-Volume Spray Painting


Waterproofing is a method which prevents water from penetrating your house. Waterproofing is very important as it helps keep your house dry. It helps reduce humidity inside the house and thereby protects things inside your house from damage caused due to humidity or water exposure. It is also important for the veracity of the building.

Following are the jobs done


• Check walls for faults
• Clean your gutters
• Select the right waterproofer
• Use plaster waterproofing additive
• Prepare your walls for waterproofing
• Apply the waterproofer
• Test



Normally wooden surface required different types of finishes according to the client need. There are many types of paints for different uses and applications. So make sure to understand the requirement. Below is just an outline process.

Following are the jobs done

    • Make sure to remove any dust and dirt.
    • Scrub the old wood finishes by sand paper.
    • Wood Primer (1st Coat)  – Mix the thinner with the wood primer to the recommended ratio and apply one coat. Allow them to dry (6-8 hours)
    • Putty – Generally 2 coats of primer will be applied on woods. Apply one coat of Putty or Lambi and allow them to dry.
    • Wood Primer Primer (2nd Coat)– Sand the applied the surface and start to paint the second coat of putty.
    • Enamels – Now apply the enamel on the wood surface. Allow them to dry.
    • Paint – Now apply 2 coats of paint on the surface


Following are the jobs done

Surface Preparation

  • Clean the metal surfaces by water to wipe off any dirt and grease or oil things.
  • Ensure that the metal surface is free from rust.
  • Sand the surface with sandpaper.
  • Scrub off rust from the metal


  • Metal Primer – Apply one coat of metal primer. Allow them to dry
  • Sanding – Sand the primer and make sure the surface is clean
  • Enamel – Apply 2 coats of recommended enamels. Make sure to give proper time to dry between coats